Cleaning a .410 shotgun seems little daunting tasks but actually it is very easy if you know the right trick! Not only the trick, but you also need some equipment as well that will help you to clean .410 shotgun effectively.
However, if you are a beginner and want to learn how to clean a .410 shotgun, this very guide is for you. We have made step by step guide for you so that you can understand easily.
Step 1: Arrange the cleaning kit
A cleaning kit is the most plays an important role in any type of gun cleaning. Without proper tools, it is impossible to clean a .420 shotgun. If you use the right tools for .410 shotguns it will save your money and time both. In the market, you will find lots of tools for .410 shot cleaning but choose the right one is a difficult task to do. Don’t worry we are will suggest you perfect solution to clean your .410 shotgun. You can buy those separate tools. If you want to buy a full kit then your kit has these following kits.
- Box of patches.
- A bristle.
- A cotton mop.
- A bottle of solvent.
- A rod.
Step 2: Dissemble
Before starting disassembles your gun you need to unload your gun. While dissemble if there any bullet available then it can occur any accident. So you have to make sure there is no gun available in your gun’s magazine. Also, check the barrel properly that there is no bullet remains.
After removing all the bullet check the gun, again and again, to make sure that your gun is fully unloaded. Now it’s time to disassemble your gun. Depending on manufacturer different gun have different assemble types. But every shot has almost the same type body type along with .410 shotgun. Those are barrel, magazine, handle.
So you have to disassemble those parts. To disassemble those parts you have to follow the user manual. Every gun comes with its user manual. After though if you find any difficulty in disassembling your .410 gun then goggle it. Just put the model in the google search option.
Step 3: Cleaning the barrel
In this step, you will need a cleaning rod ( here some best cleaning rods)and a bristle. Attach the bristle with the cleaning rod. It is a very simple process to attach them both. Take the bristle and screw it clockwise at the top of the cleaning rod.
Now you have to run the cleaning rod into the barrel. Bristle will help you to clean all the dust from the barrel of the gun. Sometimes some metal foul stuck in the barrel. Bristle with cleaning rod will help you to remove that metal foul. First position your muzzle toward the ground.
Now run the cleaning rod in the barrel. Push the rod into the barrel for some time and pull it back. You have to repeat this process for 8-9 times. Remember one thing while pushing the cleaning rod in your .410 gun barrel. You have done it softly and quickly. If you push so hard it can damage your gun’s barrel.
Step 4: Remove the bristle
Now you have to remove the bristle from the cleaning rod. Attach the cotton mop in the rod adapter. For tightening the attachment you have to spin the mop clockwise.
Now you will need the solvent. Put some solvent in the mop. Then run the rod in the barrel of the gun. If you don’t want to apply the solvent directly you can take a patch (take a look at best gun cleaning patches) and a cotton swab. Using cotton swab put some solvent in the patches.
Now put patches at the front of the gun’s barrel. Push the patch in the gun barrel using a cleaning rod. Spin the cleaning rod clockwise properly in the barrel of the gun. After some time removes, the patch from the barrel and you will notice that dust and metal came out from your gun.
Take a new patch. Repeat the process. Take solvent in the patches as before. Do the process until all the dust comes out.
Step 5: Apply the lubricant
After cleaning the gun proper you have applied the lubricant in the barrel. The lubricant will make your.410 shotgun smoother for firing. Take a new clean patch. Put a little bit lubricant into it. Now run the patch in the barrel using the cleaning rod. It will help you to spread all the lubricant the barrel.
Step 6: Clean and assemble
Take a microfiber towel and clean your whole gun part. Wipeout all the oil from your gun using a microfiber towel. Make sure you remove all the oil from the outside of the barrel.
After that, you have attached all the guns part. Attach the barrel, forearm, and stock. If you forgot to assemble your gun then just follow the instruction of your .410 shotgun. Now your.410 shotgun is ready to fire
If you are still here you must learn how to clean a .410 shotgun! However, if you are struggling to understand any part, hit us through the comment section.